{"title":"Primary Gas Regulator Valves","description":"Primary Gas Regulator Valves","products":[{"product_id":"double-co2-cylinder-wall-bracket-and-chains","title":"Double CO2 Cylinder Wall Bracket \u0026 Chains – Twin Gas Bottle Restraint","description":"\u003ch2\u003e\u003cspan\u003eDouble CO2 Cylinder Wall Bracket \u0026amp; Chains – Twin Gas Bottle Restraint\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDouble CO2 Cylinder Wall Bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is designed to secure \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwo compatible gas bottles\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e in an upright position within pubs, bars, cellars and professional drinks dispense installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bracket mounts to a suitable wall or solid surface and features \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwo retaining chains\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing two cylinders to be individually restrained and helping prevent them from being knocked or accidentally falling over.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIdeal for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCO2, mixed gas and nitrogen cylinders\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e used with draught beer and beverage systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTwin Gas Bottle Wall Bracket\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eProfessional draught dispense installations often use multiple gas cylinders, particularly where different gas types are required or a reserve cylinder is kept alongside the cylinder currently in use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwin gas bottle bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e provides a simple way to secure two compatible cylinders against a suitable wall.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe two retaining chains allow each bottle to be restrained individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eDouble CO2 cylinder wall bracket\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDesigned to secure \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwo gas cylinders\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIncludes \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwo retaining chains\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWall mounted gas bottle restraint\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelps keep cylinders secured in an upright position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelps prevent cylinders being accidentally knocked over\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for compatible CO2 cylinders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for compatible mixed gas cylinders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for compatible nitrogen cylinders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for pubs, bars and cellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for professional draught dispense systems\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable for Beverage Gas Cylinders\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bracket can be used to secure compatible gas bottles supplying equipment such as:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCO2 primary regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMixed gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNitrogen regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecondary gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGas manifolds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDraught beer systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSoft drinks systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOther compatible beverage dispense equipment\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways check that the bracket and chains are suitable for the dimensions of the cylinders being restrained.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWall Mounted Double Cylinder Restraint\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eMounting the bracket to a suitable solid surface provides a fixed restraint point for two gas bottles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eEach cylinder should be positioned upright and secured using its individual retaining chain.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUse appropriate fixings for the wall construction and anticipated load. Installation fixings are not included unless otherwise stated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDouble CO2 Cylinder Wall Bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is suitable for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePubs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBreweries\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrewery taprooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRestaurants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHotels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCellars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvent bar storage areas\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProfessional drinks dispense installations\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eUseful for Main \u0026amp; Reserve Cylinders\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA double gas bottle bracket can be particularly useful where a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emain and reserve gas cylinder\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e are positioned together.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIt can also be used where different beverage gases are required within the same cellar or bar installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways clearly identify individual gas cylinders and pipework to prevent incorrect connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eImportant\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eGas cylinders contain gas under high pressure and must be handled, stored and installed correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis bracket provides a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ephysical restraint for compatible gas cylinders\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. It does not replace appropriate ventilation, cylinder handling, storage or gas safety procedures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eEnsure the bracket is securely fixed to a suitable surface before installing cylinders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSupplied As\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e1 x Double Gas Bottle Wall Bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003e2 x Retaining Chains\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGas cylinders, regulators and wall fixings are not included unless otherwise stated.\u003c\/span\u003e\u003c\/p\u003e","brand":"Drin-KIT","offers":[{"title":"Default Title","offer_id":48008305344845,"sku":"6\/289","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/Gasottlebracket.jpg?v=1754990260"},{"product_id":"co2-gas-regulator-prv-wall-mounted","title":"CO2 Gas Regulator PRV – Wall Mounted 0–35 PSI Beer Regulator","description":"\u003ch2\u003e\u003cspan\u003eCO2 Gas Regulator PRV – Wall Mounted 0–35 PSI Beer Regulator\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eWall Mounted CO2 Gas Regulator with PRV\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is a primary beverage gas regulator designed for controlling CO2 pressure in professional \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003edraught beer and beverage dispense systems\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe regulator reduces the incoming CO2 supply to an adjustable working pressure of \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e0–35 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing the pressure to be set according to the requirements of the individual draught system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFeaturing \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003edual pressure relief valves\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e3\/8\" push-fit outlet\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and a wall mounting bracket, it is ideal for permanent cellar, bar and brewery gas installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWall Mounted CO2 Beer Gas Regulator\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUnlike a bottle-mounted regulator, this version is designed to be \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esecured to a wall or suitable fixed surface\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis can provide a cleaner and more accessible installation in professional cellars where gas cylinders and dispense equipment are permanently positioned.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe included mounting bracket keeps the regulator securely positioned while allowing straightforward access for pressure adjustment and servicing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eWall mounted CO2 gas regulator\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrimary regulator for draught beer systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSingle-stage pressure regulation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAdjustable \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e0–35 PSI outlet pressure\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for compatible CO2 beverage gas systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e3\/8\" push-fit gas outlet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual pressure relief valves\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWall mounting bracket included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for professional cellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for draught beer and beverage systems\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eAdjustable 0–35 PSI Pressure\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe regulator provides an adjustable outlet pressure from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e0 to 35 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis allows the CO2 pressure to be set according to the requirements of the beverage and dispense installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe correct operating pressure can depend on factors including:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBeverage type\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKeg requirements\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStorage temperature\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarbonation level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBeer line diameter and length\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCooler configuration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTap and font arrangement\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways use the pressure recommended for the individual product and dispense system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDual Pressure Relief Valves\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe regulator incorporates \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etwo pressure relief valves (PRVs)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e as part of its pressure management and safety design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePressure relief valves should never be blocked, modified or relied upon as a substitute for correct regulator installation and adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e3\/8\" Push-Fit Outlet\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe regulator is fitted with a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e3\/8\" push-fit gas outlet\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing connection to compatible 3\/8\" beverage gas pipework.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis makes it suitable for integration into professional cellar gas systems using standard 3\/8\" push-fit pipe and fittings.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWall Mounting Bracket Included\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ewall mounting bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is supplied with the regulator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eMounting the regulator to a suitable solid surface keeps it accessible while helping to keep cellar gas equipment and pipework organised.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUse appropriate fixings for the wall construction and installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary \u0026amp; Secondary Regulation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis regulator can provide the primary regulated CO2 supply for a draught dispense installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhere individual kegs require different pressures, compatible secondary regulator valves can be installed downstream.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA typical installation may be:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eCO2 Supply → Wall Mounted Primary Regulator → Gas Pipe → Secondary Regulator → Keg Coupler\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eWall Mounted CO2 Gas Regulator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is suitable for compatible beverage gas systems used in:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePubs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBreweries\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrewery taprooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRestaurants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHotels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMobile bar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvent bars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProfessional draught dispense systems\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eRegulator Type:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Primary CO2 gas regulator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eConfiguration:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Wall mounted\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eGas:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e CO2\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eRegulation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Single stage\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdjustable Outlet Pressure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 0–35 PSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eOutlet Connection:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 3\/8\" push-fit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePressure Relief:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Dual PRV\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMounting Bracket:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Included\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis regulator is intended for use with \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecompatible beverage CO2 systems\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways ensure the correct regulator, gas type and operating pressure are used for the individual draught system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGas cylinders and associated equipment operate under high pressure and should be installed and maintained by a competent person familiar with beverage gas systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"Drin-KIT","offers":[{"title":"Default Title","offer_id":48141797130573,"sku":"DKCO2WM","price":54.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/image5-min.jpg?v=1787504199"},{"product_id":"co2-gas-regulator-prv-bottle-mounted","title":"CO2 Gas Primary Regulator – Bottle Mounted 0–35 PSI Beer Regulator","description":"\u003ch2\u003eCO2 Gas Primary Regulator – Bottle Mounted 0–35 PSI Beer Regulator\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eCO2 Gas Primary Regulator PRV Bottle Mounted\u003c\/strong\u003e is a beverage gas regulator designed for controlling CO2 pressure in professional \u003cstrong\u003edraught beer and beverage dispense systems\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eMounted directly onto a compatible CO2 gas cylinder, the regulator reduces the high cylinder pressure to an adjustable working pressure of \u003cstrong\u003e0–35 PSI\u003c\/strong\u003e, allowing the CO2 supply to be set for the requirements of the individual draught system.\u003c\/p\u003e\u003cp\u003eFeaturing a \u003cstrong\u003e3\/8\" push-fit gas outlet\u003c\/strong\u003e and \u003cstrong\u003edual pressure relief valves\u003c\/strong\u003e, this regulator is suitable for pubs, bars, breweries and other professional drinks dispense installations.\u003c\/p\u003e\u003ch3\u003eBottle Mounted CO2 Beer Gas Regulator\u003c\/h3\u003e\u003cp\u003eThis is a \u003cstrong\u003eprimary CO2 regulator\u003c\/strong\u003e, meaning it connects directly to the gas cylinder and provides the first stage of pressure reduction within the dispense system.\u003c\/p\u003e\u003cp\u003eThe regulated CO2 supply can then be connected directly to compatible dispense equipment or supplied to secondary regulator valves where individual keg pressures need to be controlled separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBottle mounted CO2 gas regulator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePrimary regulator for draught beer systems\u003c\/li\u003e\n\u003cli\u003eAdjustable \u003cstrong\u003e0–35 PSI outlet pressure\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible CO2 cylinders\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" push-fit gas outlet\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDual pressure relief valves\u003c\/li\u003e\n\u003cli\u003eSuitable for professional beverage dispense systems\u003c\/li\u003e\n\u003cli\u003eSuitable for pubs, bars and breweries\u003c\/li\u003e\n\u003cli\u003eCan supply compatible secondary gas regulators\u003c\/li\u003e\n\u003cli\u003eCompact bottle mounted design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdjustable 0–35 PSI Pressure\u003c\/h3\u003e\u003cp\u003eThe regulator provides an adjustable outlet pressure between \u003cstrong\u003e0 and 35 PSI\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThis allows the working pressure to be set according to the requirements of the beverage and dispense installation.\u003c\/p\u003e\u003cp\u003eCorrect dispense pressure depends on several factors, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeverage type\u003c\/li\u003e\n\u003cli\u003eStorage temperature\u003c\/li\u003e\n\u003cli\u003eRequired carbonation\u003c\/li\u003e\n\u003cli\u003eBeer line diameter and length\u003c\/li\u003e\n\u003cli\u003eCooler configuration\u003c\/li\u003e\n\u003cli\u003eTap and font arrangement\u003c\/li\u003e\n\u003cli\u003eKeg manufacturer's recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThere is no single correct pressure for every draught system.\u003c\/p\u003e\u003ch3\u003e3\/8\" Push-Fit Gas Outlet\u003c\/h3\u003e\u003cp\u003eThe regulator is fitted with a \u003cstrong\u003e3\/8\" push-fit outlet\u003c\/strong\u003e, allowing connection to compatible 3\/8\" beverage gas pipe.\u003c\/p\u003e\u003cp\u003eThis is a standard pipe size used throughout many professional draught beer and cellar gas installations.\u003c\/p\u003e\u003ch3\u003eDual Pressure Relief Valves\u003c\/h3\u003e\u003cp\u003eThe regulator incorporates \u003cstrong\u003etwo pressure relief valves\u003c\/strong\u003e as part of its pressure management and safety design.\u003c\/p\u003e\u003cp\u003eThese are intended to provide pressure relief should the regulated side of the system experience excessive pressure.\u003c\/p\u003e\u003cp\u003ePressure relief devices should never be blocked, modified or used as a substitute for correct regulator adjustment and installation.\u003c\/p\u003e\u003ch3\u003ePrimary \u0026amp; Secondary Gas Regulation\u003c\/h3\u003e\u003cp\u003eThis regulator can be used as the primary pressure regulator within a larger cellar gas installation.\u003c\/p\u003e\u003cp\u003eA typical system may consist of:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCO2 Cylinder → Primary CO2 Regulator → Gas Pipe → Secondary Regulator → Keg Coupler\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSecondary regulators can then be used where different kegs or products require individual dispense pressures.\u003c\/p\u003e\u003ch3\u003eSuitable For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eBottle Mounted CO2 Gas Regulator\u003c\/strong\u003e is suitable for compatible CO2 beverage gas systems used in:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePubs\u003c\/li\u003e\n\u003cli\u003eBars\u003c\/li\u003e\n\u003cli\u003eBreweries\u003c\/li\u003e\n\u003cli\u003eBrewery taprooms\u003c\/li\u003e\n\u003cli\u003eRestaurants\u003c\/li\u003e\n\u003cli\u003eHotels\u003c\/li\u003e\n\u003cli\u003eCellar installations\u003c\/li\u003e\n\u003cli\u003eMobile bars\u003c\/li\u003e\n\u003cli\u003eEvent bars\u003c\/li\u003e\n\u003cli\u003eProfessional draught dispense systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant\u003c\/h3\u003e\u003cp\u003eThis regulator is designed for \u003cstrong\u003ecompatible beverage-grade CO2 systems\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eAlways ensure the regulator connection matches the gas cylinder being used and that the correct beverage gas is connected.\u003c\/p\u003e\u003cp\u003eGas cylinders contain gas under high pressure. Regulators and associated gas equipment should be installed and adjusted by a competent person familiar with beverage gas systems.\u003c\/p\u003e\u003cp\u003eDo not use welding or industrial regulators as a substitute for the correct beverage gas regulator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulator Type:\u003c\/strong\u003e Primary CO2 gas regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottle mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas:\u003c\/strong\u003e CO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Outlet Pressure:\u003c\/strong\u003e 0–35 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection:\u003c\/strong\u003e 3\/8\" push-fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Relief:\u003c\/strong\u003e Dual PRV\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drin-KIT","offers":[{"title":"Default Title","offer_id":48141845233997,"sku":"DKCO2BM","price":52.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/Bottlemountco2primaryvalve-min.jpg?v=1787504250"},{"product_id":"mixed-gas-regulator-prv-bottle-mounted","title":"Mixed Gas Primary Regulator PRV – Bottle Mounted Beer Gas Regulator","description":"\u003ch2\u003eMixed Gas Primary Regulator PRV – Bottle Mounted Beer Gas Regulator\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eMixed Gas Primary Regulator PRV Bottle Mounted\u003c\/strong\u003e is a primary beverage gas regulator designed for use with compatible \u003cstrong\u003emixed gas and nitrogen cylinders\u003c\/strong\u003e in professional draught beer and beverage dispense systems.\u003c\/p\u003e\u003cp\u003eSuitable for common beverage gas mixtures including \u003cstrong\u003e30\/70 and 60\/40\u003c\/strong\u003e, as well as compatible \u003cstrong\u003enitrogen (N2)\u003c\/strong\u003e supplies, the regulator provides adjustable pressure control with a \u003cstrong\u003emaximum outlet pressure of 45 PSI\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt features a \u003cstrong\u003e3\/8\" push-fit outlet\u003c\/strong\u003e and \u003cstrong\u003edual pressure relief valves\u003c\/strong\u003e, providing a practical primary regulator for pubs, bars, breweries and professional cellar installations.\u003c\/p\u003e\u003ch3\u003eBottle Mounted Mixed Gas Beer Regulator\u003c\/h3\u003e\u003cp\u003eThis is a \u003cstrong\u003eprimary gas regulator\u003c\/strong\u003e, designed to connect directly to a compatible beverage gas cylinder.\u003c\/p\u003e\u003cp\u003eThe regulator reduces the high cylinder pressure to a suitable working pressure for the draught dispense system.\u003c\/p\u003e\u003cp\u003eThe regulated supply can then be connected to compatible keg couplers or distributed through secondary regulators where individual products require different pressures.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBottle mounted mixed gas regulator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePrimary regulator for draught beer systems\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible \u003cstrong\u003e30\/70 mixed gas\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible \u003cstrong\u003e60\/40 mixed gas\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible \u003cstrong\u003enitrogen beverage gas\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum outlet pressure: \u003cstrong\u003e45 PSI\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" push-fit outlet\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDual pressure relief valves\u003c\/li\u003e\n\u003cli\u003eSafety relief pressure approximately \u003cstrong\u003e52 PSI\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for professional beverage dispense systems\u003c\/li\u003e\n\u003cli\u003eSuitable for pubs, bars, breweries and cellar installations\u003c\/li\u003e\n\u003cli\u003ePush-fit outlet style may vary\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e30\/70 Mixed Gas\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e30\/70 mixed gas\u003c\/strong\u003e contains approximately 30% CO2 and 70% nitrogen and is commonly used with certain draught products where a higher nitrogen content is required.\u003c\/p\u003e\u003cp\u003eAlways use the gas mixture specified by the brewery or beverage manufacturer.\u003c\/p\u003e\u003ch3\u003e60\/40 Mixed Gas\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e60\/40 mixed gas\u003c\/strong\u003e contains approximately 60% CO2 and 40% nitrogen and is commonly used with a range of draught beers and lagers.\u003c\/p\u003e\u003cp\u003eThe correct gas mixture and operating pressure will depend on the beverage and dispense system.\u003c\/p\u003e\u003ch3\u003eNitrogen Beverage Gas\u003c\/h3\u003e\u003cp\u003eThe regulator can also be used with compatible \u003cstrong\u003enitrogen beverage gas systems\u003c\/strong\u003e, subject to the requirements of the individual installation.\u003c\/p\u003e\u003cp\u003eAlways confirm the correct cylinder connection, gas type and pressure range before use.\u003c\/p\u003e\u003ch3\u003eMaximum 45 PSI Outlet Pressure\u003c\/h3\u003e\u003cp\u003eThe regulator provides adjustable gas pressure up to a \u003cstrong\u003emaximum output of 45 PSI\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eCorrect operating pressure depends on factors including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeverage type\u003c\/li\u003e\n\u003cli\u003eGas mixture\u003c\/li\u003e\n\u003cli\u003eKeg requirements\u003c\/li\u003e\n\u003cli\u003eStorage temperature\u003c\/li\u003e\n\u003cli\u003eBeer line length and diameter\u003c\/li\u003e\n\u003cli\u003eCooler configuration\u003c\/li\u003e\n\u003cli\u003eTap and font arrangement\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThere is no single pressure setting suitable for every draught system.\u003c\/p\u003e\u003ch3\u003eDual Pressure Relief Valves\u003c\/h3\u003e\u003cp\u003eThe regulator incorporates \u003cstrong\u003etwo pressure relief valves\u003c\/strong\u003e, with a stated blow-off pressure of approximately \u003cstrong\u003e52 PSI\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThese provide pressure relief should excessive pressure occur on the regulated side of the system.\u003c\/p\u003e\u003cp\u003ePressure relief valves should never be blocked, modified or used as a substitute for correct regulator setup.\u003c\/p\u003e\u003ch3\u003e3\/8\" Push-Fit Outlet\u003c\/h3\u003e\u003cp\u003eThe regulator is supplied with a \u003cstrong\u003e3\/8\" push-fit gas outlet\u003c\/strong\u003e for connection to compatible beverage gas pipe.\u003c\/p\u003e\u003cp\u003eThe exact style of the push-fit fitting may vary depending on stock.\u003c\/p\u003e\u003ch3\u003ePrimary \u0026amp; Secondary Gas Regulation\u003c\/h3\u003e\u003cp\u003eWhere several kegs require different dispense pressures, this primary regulator can supply compatible secondary gas regulators.\u003c\/p\u003e\u003cp\u003eA typical installation may be:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMixed Gas Cylinder → Primary Mixed Gas Regulator → Gas Pipe → Secondary Regulator → Keg Coupler\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis allows individual products to be operated at appropriate secondary pressures from the same primary gas supply.\u003c\/p\u003e\u003ch3\u003eSuitable For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eBottle Mounted Mixed Gas Regulator\u003c\/strong\u003e is suitable for compatible beverage gas systems used in:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePubs\u003c\/li\u003e\n\u003cli\u003eBars\u003c\/li\u003e\n\u003cli\u003eBreweries\u003c\/li\u003e\n\u003cli\u003eBrewery taprooms\u003c\/li\u003e\n\u003cli\u003eRestaurants\u003c\/li\u003e\n\u003cli\u003eHotels\u003c\/li\u003e\n\u003cli\u003eCellar installations\u003c\/li\u003e\n\u003cli\u003eMobile bars\u003c\/li\u003e\n\u003cli\u003eEvent bars\u003c\/li\u003e\n\u003cli\u003eProfessional draught dispense systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulator Type:\u003c\/strong\u003e Primary mixed gas regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Bottle mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Gas:\u003c\/strong\u003e 30\/70 mixed gas, 60\/40 mixed gas and compatible nitrogen beverage gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outlet Pressure:\u003c\/strong\u003e 45 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Relief:\u003c\/strong\u003e Dual PRV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Pressure:\u003c\/strong\u003e Approximately 52 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection:\u003c\/strong\u003e 3\/8\" push-fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-Fit Style:\u003c\/strong\u003e May vary\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant\u003c\/h3\u003e\u003cp\u003eThis regulator is intended for use with \u003cstrong\u003ecompatible beverage gas cylinders and draught dispense systems\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eAlways check that the cylinder connection, regulator and gas type are compatible before installation.\u003c\/p\u003e\u003cp\u003eGas cylinders contain gas under high pressure and should be handled and connected by a competent person familiar with beverage gas systems.\u003c\/p\u003e","brand":"Drin-KIT","offers":[{"title":"Default Title","offer_id":48141920272717,"sku":"DKMGBM","price":52.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/Bottlemountmixedgasprimaryvalve-min.jpg?v=1787504300"},{"product_id":"co2-cylinder-wall-bracket-and-chain","title":"CO2 Cylinder Wall Bracket \u0026 Chain – Gas Bottle Restraint","description":"\u003ch2\u003e\u003cspan\u003eCO2 Cylinder Wall Bracket \u0026amp; Chain – Gas Bottle Restraint\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCO2 Cylinder Wall Bracket and Chain\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is designed to secure compatible gas bottles in an upright position within pubs, bars, cellars and professional drinks dispense installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bracket fixes to a suitable wall or solid surface, while the retaining chain fits around the cylinder to help prevent it from being knocked or accidentally falling over.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIdeal for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCO2 cylinders used with draught beer and beverage systems\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, this simple gas bottle restraint helps keep cellar and bar gas installations organised.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCO2 Gas Bottle Wall Bracket\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eGas cylinders should be properly secured when stored or connected as part of a draught dispense installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ewall mounted gas bottle bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e provides a fixed restraint point for a compatible CO2 cylinder, with the chain wrapping around the bottle to hold it against the wall.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIt is particularly useful in cellars and other areas where cylinders are positioned close to regulators, gas manifolds and draught dispense equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eCO2 cylinder wall bracket\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGas bottle restraint for draught dispense installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes retaining chain\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelps secure cylinders in an upright position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWall mounted design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelps prevent cylinders being accidentally knocked over\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for compatible beverage gas cylinders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for pubs, bars and cellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for professional drinks dispense systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwin cylinder bracket also available separately\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable for Draught Beer Gas Systems\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bracket is suitable for securing compatible gas cylinders used with professional beverage dispense equipment including:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCO2 beer gas systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrimary gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecondary regulator systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGas manifolds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDraught beer installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSoft drinks dispense systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCellar gas installations\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways confirm that the bracket and chain are suitable for the size and type of cylinder being secured.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWall Mounted Gas Cylinder Restraint\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe wall mounted design keeps the restraint securely positioned rather than relying on a freestanding cylinder support.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInstall the bracket onto a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esuitable solid surface using appropriate fixings for the wall construction and anticipated load\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe cylinder should be positioned upright and the chain secured around it at an appropriate height to provide effective restraint.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCO2 Cylinder Wall Bracket and Chain\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is ideal for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePubs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBreweries\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrewery taprooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRestaurants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHotels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCellars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMobile bar storage areas\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProfessional drinks dispense installations\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eGas cylinders contain gas under high pressure and must be stored, handled and installed correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis bracket is intended to provide a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ephysical restraint for a compatible cylinder\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. It does not replace appropriate gas cylinder handling, ventilation, storage or safety procedures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUse suitable wall fixings for the installation surface and ensure the bracket is securely installed before restraining a cylinder.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSupplied As\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e1 x Gas Bottle Wall Bracket\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003e1 x Retaining Chain\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGas cylinder, regulator and installation fixings are not included unless otherwise stated.\u003c\/span\u003e\u003c\/p\u003e","brand":"Drin-KIT","offers":[{"title":"Default Title","offer_id":48224065847629,"sku":"CO2BRKTSINGLE","price":6.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/Drin-kit-single-gas-bottle-wall-mounted-chain_1.jpg?v=1754990080"},{"product_id":"secondary-valve-screw","title":"Drin-KIT Gas Regulator Control Screw – Replacement Pressure Adjustment Screw","description":"\u003ch2\u003e\u003cspan\u003eDrin-KIT Gas Regulator Control Screw – Replacement Pressure Adjustment Screw\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDrin-KIT Gas Regulator Control Screw\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is a replacement pressure adjustment screw for compatible \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDrin-KIT primary and secondary gas regulators\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eLocated in the centre of the regulator body, the control screw is used to \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eincrease or decrease the regulated outlet pressure\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing the gas pressure to be set according to the requirements of the draught beer or beverage dispense system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIdeal as a replacement for a lost or damaged adjustment screw on a compatible Drin-KIT gas regulator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eThis listing is for the control screw only. Gas regulator not included.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eReplacement Gas Regulator Pressure Adjustment Screw\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe central adjustment screw controls the pressure setting of the regulator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eTurning the screw changes the load applied to the internal regulator mechanism, allowing the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eoutlet pressure to be increased or decreased\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe actual outlet pressure should be checked using the regulator pressure gauge or other appropriate pressure measuring equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eReplacement gas regulator control screw\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePressure adjustment screw for compatible Drin-KIT regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eUsed to adjust \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eregulated outlet pressure\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for compatible primary gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for compatible secondary gas regulators \/ SRVs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReplacement for lost or damaged adjustment screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple screw-in replacement component\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for professional draught dispense equipment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eControl screw only – regulator not included\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eCompatible Drin-KIT Gas Regulators\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eDesigned for compatible Drin-KIT regulator valves, including suitable:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCO2 primary gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMixed gas primary regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWall mounted gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBottle mounted gas regulators\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecondary gas regulator valves \/ SRVs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways check compatibility with the individual regulator before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAdjusting Regulator Outlet Pressure\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe control screw is used to alter the regulator's \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eoutlet pressure setting\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIt does not directly act as a gas flow control valve. Gas flow through the system will depend on the regulator setting and the requirements of the connected dispense equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhen adjusting a regulator, monitor the outlet pressure and use the correct pressure for the beverage and draught system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis replacement pressure adjustment screw is suitable for compatible Drin-KIT regulators used in:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePubs and bars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBreweries\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrewery taprooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRestaurants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMobile bars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvent bars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProfessional draught dispense systems\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant – Control Screw Only\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eThis listing is for one Drin-KIT gas regulator control screw only.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe gas regulator, pressure gauge, mounting bracket and other components are not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGas equipment should be isolated and depressurised before replacing components. Always ensure the regulator is correctly adjusted and operating within its specified pressure range before returning the system to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Drin-KIT","offers":[{"title":"Default Title","offer_id":49704570782029,"sku":"SRV-SCREW","price":2.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/screwforgasregulators.jpg?v=1754990040"},{"product_id":"mixed-gas-regulator-prv-wall-mounted-micromatic","title":"Micromatic Perfect Plus 100 Mixed Gas Regulator – Wall Mounted","description":"\u003ch2\u003e\u003cspan\u003eMicromatic Perfect Plus 100 Mixed Gas Regulator – Wall Mounted\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMicromatic Perfect Plus 100 Mixed Gas Regulator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is a professional \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ewall mounted primary gas regulator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e designed for draught beer and beverage dispense systems using mixed gas or nitrogen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSuitable for compatible \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e30\/70 mixed gas, 60\/40 mixed gas and nitrogen beverage gas\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the regulator provides adjustable pressure control with a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emaximum outlet pressure of 45 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe wall mounted design makes the Perfect Plus 100 particularly suitable for permanent pub, bar, brewery and cellar installations, with a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e3\/8\" push-fit outlet\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for connection to compatible beverage gas pipework.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eMicromatic Perfect Plus 100 Beer Gas Regulator\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePerfect Plus 100\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is designed to provide primary pressure regulation within a professional beverage gas installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eRather than mounting directly onto the gas cylinder, this version is installed on a suitable wall or fixed surface, providing an accessible regulator position within the cellar or gas installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIt can be used to provide the regulated gas supply directly to compatible dispense equipment or to feed secondary regulators where individual kegs require different operating pressures.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eMicromatic Perfect Plus 100\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWall mounted mixed gas regulator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrimary regulator for professional draught systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSuitable for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e30\/70 mixed gas\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSuitable for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e60\/40 mixed gas\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSuitable for compatible \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enitrogen beverage gas\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum outlet pressure: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e45 PSI\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e3\/8\" push-fit outlet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual pressure relief valves\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSafety relief pressure approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e52 PSI\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWall mounted design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for professional cellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eCompatible Beverage Gases\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Micromatic Perfect Plus 100 is suitable for compatible beverage gas supplies including:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e30\/70 Mixed Gas\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA mixture of approximately 30% CO2 and 70% nitrogen, commonly used for certain draught products requiring a higher nitrogen content.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e60\/40 Mixed Gas\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA mixture of approximately 60% CO2 and 40% nitrogen, commonly used with a range of draught beers and lagers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eNitrogen (N2)\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eSuitable for compatible beverage nitrogen applications where required by the individual dispense system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways use the gas type and mixture specified for the beverage being dispensed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eMaximum 45 PSI Outlet Pressure\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe regulator provides adjustable pressure control up to a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emaximum outlet pressure of 45 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eCorrect dispense pressure depends on several factors, including:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBeverage type\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGas mixture\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKeg requirements\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStorage temperature\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBeer line diameter and length\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCooler configuration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTap and font arrangement\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways set the regulator according to the requirements of the individual draught system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDual Pressure Relief Valves\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Perfect Plus 100 incorporates \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003edual pressure relief valves\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, with a stated relief pressure of approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e52 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThese provide pressure relief protection on the regulated side of the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePressure relief valves should never be blocked, modified or used as a substitute for correct regulator adjustment and installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e3\/8\" Push-Fit Gas Outlet\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe regulator features a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e3\/8\" push-fit outlet\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for connection to compatible beverage gas pipe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis allows integration with standard 3\/8\" gas pipework commonly used throughout professional draught beer and cellar installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWall Mounted Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe wall mounted configuration keeps the regulator accessible and helps organise gas equipment within permanent cellar installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis can be particularly useful where gas cylinders are stored separately from the main regulator and dispense equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways use suitable fixings for the mounting surface and ensure the regulator is installed securely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary \u0026amp; Secondary Gas Regulation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Perfect Plus 100 can provide the primary regulated gas supply to compatible secondary regulators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA typical professional installation may be:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eMixed Gas Supply → Micromatic Perfect Plus 100 → Gas Pipe → Secondary Regulator → Keg Coupler\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSecondary regulators can then be used to set different pressures for individual kegs or groups of kegs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMicromatic Perfect Plus 100 Mixed Gas Regulator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is suitable for compatible beverage gas systems used in:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePubs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBars\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBreweries\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrewery taprooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRestaurants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHotels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCellar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvent bar installations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProfessional draught dispense systems\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eManufacturer:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Micromatic\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eModel:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Perfect Plus 100\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eRegulator Type:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Primary mixed gas regulator\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMounting:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Wall mounted\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eGas Compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 30\/70, 60\/40 and compatible nitrogen beverage gas\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMaximum Outlet Pressure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 45 PSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eGas Outlet:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 3\/8\" push-fit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePressure Relief:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Dual safety valves\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eRelief Pressure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Approximately 52 PSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eImportant\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis regulator is intended for use with \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecompatible beverage gas supplies and professional draught dispense systems\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways confirm the correct gas type, connection and operating pressure before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGas cylinders and associated equipment operate under high pressure and should be installed and maintained by a competent person familiar with beverage gas systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":53172819886413,"sku":"PP519003C0101-C100","price":79.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/3770\/1197\/files\/Micromaticmixedgasprimaryvalve.jpg?v=1770976397"}],"url":"https:\/\/drin-kit.com\/pt\/collections\/primary-gas-regulator-valves.oembed","provider":"Drin-Kit","version":"1.0","type":"link"}