DMfit AUC15M06 15mm to 3/8" Reducing Straight Connector – 10 Pack

15mm to 3/8" Push-Fit Reducer for Drinks Dispense & Cooling Systems

The DMfit AUC15M06 15mm to 3/8" Reducing Straight Connector is a push-fit reducer designed to connect 15mm OD pipe to 3/8" OD pipe. It provides a straightforward way to transition between metric 15mm pipework and 3/8" imperial tubing within compatible drinks dispense, cooling, water and beverage systems.

Both sides use push-fit connections, allowing the two pipe sizes to be joined without hose tails, clips or threaded adaptors.

Supplied as a pack of 10 DMfit AUC15M06 reducing connectors.

DMfit 15mm to 3/8" Push-Fit Reducer

The AUC15M06 combines a 15mm push-fit socket at one end with a 3/8" push-fit socket at the other.

This makes the fitting particularly useful where larger 15mm pipework needs to transition to smaller 3/8" tubing within an installation.

The push-fit connections are demountable, allowing the fitting to be removed or repositioned during servicing or system alterations.

Key Features

• Genuine DMfit AUC15M06
• 15mm push fit x 3/8" push fit
• Connects 15mm OD pipe to 3/8" OD pipe
• Straight reducing connector
• Metric-to-imperial pipe adaptor
• Push-fit installation
• No hose clips required
• Demountable connections
• Acetal construction
• Suitable for compatible drinks dispense systems
• Suitable for compatible cooling and water pipework
• Useful for equipment installation, servicing and modifications
• Supplied as a pack of 10

Suitable For

The 15mm to 3/8" reducing connector can be used in compatible applications including:

• Draught beer systems
• Beer cooling equipment
• Beer python installations
• Chilled water pipework
• Glycol cooling systems
• Beverage dispense equipment
• Remote beer coolers
• Cellar equipment
• Brewery installations
• Mobile bar systems
• Compatible water systems

Specifications

Brand: DMfit
Part Number: AUC15M06
Fitting Type: Reducing Straight Connector
Connection 1: 15mm Push Fit
Connection 2: 3/8" Push Fit
Compatible Pipe: 15mm OD x 3/8" OD
Material: Acetal
Pack Quantity: 10

Connecting 15mm Pipe to 3/8" Pipe

The DMfit AUC15M06 is useful where an installation combines 15mm metric pipework with 3/8" imperial pipework.

For example, 15mm pipe is commonly found within drinks dispense cooling installations, while 3/8" tubing is widely used for beverage, gas, air and other dispense connections. The suitability of the fitting for a particular line will depend on the fluid, pressure, temperature and complete system configuration.

Installation

Cut both the 15mm and 3/8" OD pipe cleanly and square before pushing each pipe fully into the correct side of the connector.

To disconnect, depress the appropriate collet and withdraw the pipe.

Always check that the fitting and tubing are suitable for the intended fluid, operating pressure and temperature.