Beer Flow Controller / Restrictor – 3/8" Inlet x 5/16" Outlet

Beer Flow Controller / Restrictor – 3/8" Inlet x 5/16" Outlet

This Beer Flow Controller / Restrictor provides adjustable control over the speed of beer and other compatible draught products as they pass through the dispense line.

Featuring a 3/8" push-fit inlet and 5/16" push-fit outlet, the controller is designed to be installed in the product line, commonly beneath a beer font or close to the dispense point.

Simply turn the adjustment collar to increase or decrease the restriction, allowing the dispense flow rate to be adjusted without changing the beer line.

Adjustable Beer Flow Restrictor

Correct flow rate is an important part of a properly balanced draught beer system.

This adjustable beer flow controller adds variable resistance to the product line, allowing the pouring speed to be fine-tuned at the dispense point.

This can be particularly useful where fixed beer line resistance alone does not provide the required flow rate.

3/8" Inlet to 5/16" Outlet

The controller features:

• Inlet: 3/8" Push Fit
• Outlet: 5/16" Push Fit

This configuration also allows the controller to act as the transition between a 3/8" product line and a 5/16" line leading towards the beer tap or font.

Always check the pipe sizes used in your installation before ordering.

Under-Font Installation

The compact design makes the controller suitable for installation beneath a beer font, tower or bar counter, keeping the adjustment point close to the tap while remaining out of sight during normal service.

The adjustment collar remains accessible so the flow can be fine-tuned when required.

Key Features

• Adjustable beer flow controller
• Adds variable restriction to the product line
• Helps control dispense speed
• Twist adjustment collar
• 3/8" push-fit inlet
• 5/16" push-fit outlet
• Suitable for under-font installation
• Compact design
• Suitable for professional draught dispense systems
• Useful for balancing beer and cider flow rates

Suitable For

This Beer Flow Controller / Restrictor is suitable for:

• Draught beer systems
• Draught cider
• Beer fonts
• Beer towers
• Under-counter installations
• Pubs and bars
• Breweries
• Taprooms
• Mobile bars
• Home bars
• Compatible chilled draught products

Important – Beer Flow & Foaming

A flow controller can help fine-tune dispense speed by adding resistance to the product line, but it will not correct every cause of excessive foam or poor dispense.

Beer temperature, gas pressure, product carbonation, beer line diameter, line length, cooling and equipment setup all affect dispense performance.

The complete system should therefore be correctly balanced rather than relying solely on the flow controller to correct an underlying dispense problem.

Please Note

Product style and appearance may vary depending on current stock.

The connection sizes and intended function remain as stated.

Specifications

• Product: Beer Flow Controller / Restrictor
• Inlet: 3/8" Push Fit
• Outlet: 5/16" Push Fit
• Adjustment: Manual Flow Control Collar
• Installation: In-Line / Under Font
• Function: Adjustable Product Line Restriction
• Application: Draught Drinks Dispense