Micromatic Perfect Plus 100 Mixed Gas Regulator – Wall Mounted

Micromatic Perfect Plus 100 Mixed Gas Regulator – Wall Mounted

The Micromatic Perfect Plus 100 Mixed Gas Regulator is a professional wall mounted primary gas regulator designed for draught beer and beverage dispense systems using mixed gas or nitrogen.

Suitable for compatible 30/70 mixed gas, 60/40 mixed gas and nitrogen beverage gas, the regulator provides adjustable pressure control with a maximum outlet pressure of 45 PSI.

The wall mounted design makes the Perfect Plus 100 particularly suitable for permanent pub, bar, brewery and cellar installations, with a 3/8" push-fit outlet for connection to compatible beverage gas pipework.

Micromatic Perfect Plus 100 Beer Gas Regulator

The Perfect Plus 100 is designed to provide primary pressure regulation within a professional beverage gas installation.

Rather than mounting directly onto the gas cylinder, this version is installed on a suitable wall or fixed surface, providing an accessible regulator position within the cellar or gas installation.

It can be used to provide the regulated gas supply directly to compatible dispense equipment or to feed secondary regulators where individual kegs require different operating pressures.

Key Features

• Micromatic Perfect Plus 100
• Wall mounted mixed gas regulator
• Primary regulator for professional draught systems
• Suitable for 30/70 mixed gas
• Suitable for 60/40 mixed gas
• Suitable for compatible nitrogen beverage gas
• Maximum outlet pressure: 45 PSI
• 3/8" push-fit outlet
• Dual pressure relief valves
• Safety relief pressure approximately 52 PSI
• Wall mounted design
• Suitable for professional cellar installations

Compatible Beverage Gases

The Micromatic Perfect Plus 100 is suitable for compatible beverage gas supplies including:

30/70 Mixed Gas
A mixture of approximately 30% CO2 and 70% nitrogen, commonly used for certain draught products requiring a higher nitrogen content.

60/40 Mixed Gas
A mixture of approximately 60% CO2 and 40% nitrogen, commonly used with a range of draught beers and lagers.

Nitrogen (N2)
Suitable for compatible beverage nitrogen applications where required by the individual dispense system.

Always use the gas type and mixture specified for the beverage being dispensed.

Maximum 45 PSI Outlet Pressure

The regulator provides adjustable pressure control up to a maximum outlet pressure of 45 PSI.

Correct dispense pressure depends on several factors, including:

• Beverage type
• Gas mixture
• Keg requirements
• Storage temperature
• Beer line diameter and length
• Cooler configuration
• Tap and font arrangement

Always set the regulator according to the requirements of the individual draught system.

Dual Pressure Relief Valves

The Perfect Plus 100 incorporates dual pressure relief valves, with a stated relief pressure of approximately 52 PSI.

These provide pressure relief protection on the regulated side of the system.

Pressure relief valves should never be blocked, modified or used as a substitute for correct regulator adjustment and installation.

3/8" Push-Fit Gas Outlet

The regulator features a 3/8" push-fit outlet for connection to compatible beverage gas pipe.

This allows integration with standard 3/8" gas pipework commonly used throughout professional draught beer and cellar installations.

Wall Mounted Installation

The wall mounted configuration keeps the regulator accessible and helps organise gas equipment within permanent cellar installations.

This can be particularly useful where gas cylinders are stored separately from the main regulator and dispense equipment.

Always use suitable fixings for the mounting surface and ensure the regulator is installed securely.

Primary & Secondary Gas Regulation

The Perfect Plus 100 can provide the primary regulated gas supply to compatible secondary regulators.

A typical professional installation may be:

Mixed Gas Supply → Micromatic Perfect Plus 100 → Gas Pipe → Secondary Regulator → Keg Coupler

Secondary regulators can then be used to set different pressures for individual kegs or groups of kegs.

Suitable For

The Micromatic Perfect Plus 100 Mixed Gas Regulator is suitable for compatible beverage gas systems used in:

• Pubs
• Bars
• Breweries
• Brewery taprooms
• Restaurants
• Hotels
• Cellar installations
• Event bar installations
• Professional draught dispense systems

Specifications

• Manufacturer: Micromatic
• Model: Perfect Plus 100
• Regulator Type: Primary mixed gas regulator
• Mounting: Wall mounted
• Gas Compatibility: 30/70, 60/40 and compatible nitrogen beverage gas
• Maximum Outlet Pressure: 45 PSI
• Gas Outlet: 3/8" push-fit
• Pressure Relief: Dual safety valves
• Relief Pressure: Approximately 52 PSI

Important

This regulator is intended for use with compatible beverage gas supplies and professional draught dispense systems.

Always confirm the correct gas type, connection and operating pressure before installation.

Gas cylinders and associated equipment operate under high pressure and should be installed and maintained by a competent person familiar with beverage gas systems.