10mm Nail-In Pipe Clips – For 3/8" Beer & Gas Pipe – Pack of 50

10mm Nail-In Pipe Clips – For 3/8" Beer & Gas Pipe – Pack of 50

These 10mm Nail-In Pipe Clips are ideal for securing 3/8" beer, gas and compressed air pipework to suitable walls and surfaces during draught drinks dispense installations.

Designed for pipe with an outside diameter of approximately 9.5–10mm, the clips are particularly suitable for standard 3/8" drinks dispense pipe, including beer line, CO2 pipe, mixed gas pipe, nitrogen pipe and compressed air line.

Manufactured from polypropylene and supplied with 2.5 x 30mm hardened zinc-plated nails, they provide a quick way to produce neat, supported pipe runs in pubs, bars, breweries and cellar installations.

Supplied in a pack of 50 clips.

10mm Pipe Clips for 3/8" Drinks Dispense Pipe

Standard 3/8" drinks dispense pipe typically has an outside diameter of approximately 9.5mm, making these 10mm clips suitable for securing compatible pipework.

They can be used with suitable:

• 3/8" clear beer line
• 3/8" grey CO2 gas pipe
• 3/8" white 60/40 mixed gas pipe
• 3/8" green 30/70 mixed gas pipe
• 3/8" black nitrogen gas pipe
• 3/8" blue compressed air pipe

This makes them a useful installation consumable for professional drinks dispense engineers.

Key Features

• 10mm nail-in pipe clips
• Suitable for approximately 9.5–10mm OD pipe
• Ideal for standard 3/8" drinks dispense pipe
• Polypropylene clip construction
• Hardened and tempered nails
• Zinc-plated nail finish
• 2.5 x 30mm nails
• White finish
• Quick nail-in installation
• Suitable for compatible masonry surfaces
• Ideal for cellar and bar installations
• Supplied in a pack of 50

Suitable for Beer & Gas Pipework

These clips can be used to support compatible pipework throughout a draught dispense installation.

Typical applications include pipe runs between:

• Keg couplers
• Gas regulators
• Secondary regulators
• FOB detectors
• Beer pumps
• Remote beer coolers
• Cleaning equipment
• Air compressors
• Cellar equipment
• Bar and dispense equipment

Correctly supporting pipework helps keep an installation organised and reduces loose pipe hanging around the cellar or bar area.

Nail-In Installation

Each clip is supplied with a 2.5 x 30mm hardened, tempered and zinc-plated nail.

The nail-in design provides a quick fixing method on suitable surfaces without requiring separate screws and clips.

Always check that the surface is suitable before installation. Different wall and substrate types may require an alternative fixing method.

Important Pipe Sizing

The 10mm measurement refers to the approximate outside diameter of pipe the clip is designed to hold.

Standard 3/8" push-fit drinks dispense pipe has an outside diameter of approximately 9.5mm (3/8"), making these clips suitable for many common beer, beverage gas and compressed air lines.

Always check the actual outside diameter of the pipe before ordering.

Suitable For

These 10mm nail-in pipe clips are ideal for:

• Draught beer installations
• Beer line installations
• CO2 gas pipework
• Mixed gas pipework
• Nitrogen pipework
• Compressed air lines
• Pub and bar cellars
• Breweries
• Drinks dispense engineers
• General 10mm pipework

Specifications

• Product: Nail-In Pipe Clip
• Clip Size: 10mm
• Suitable Pipe: Approx. 9.5–10mm OD
• Common Drinks Dispense Size: 3/8" OD
• Clip Material: Polypropylene
• Colour: White
• Nail Size: 2.5 x 30mm
• Nail Finish: Zinc & Clear
• Pack Quantity: 50
• Pack Weight: 0.14kg
• Pack Dimensions: 203 x 152 x 55mm