1" x 10 Twin-Threaded Woodscrews – 5.0 x 25mm PZ2 – Box of 200

1" x 10 Twin-Threaded Woodscrews – 5.0 x 25mm PZ2 – Box of 200

These 1" x 10 Twin-Threaded Woodscrews are general-purpose zinc-plated screws suitable for securing brackets, equipment and fixings during drinks dispense, cellar and general installation work.

Measuring 5.0 x 25mm (No. 10 x 1"), the screws feature a PZ2 Pozi drive, double countersunk head and 60° twin-thread design for quick and secure installation.

Suitable for direct fixing into compatible softwood or for masonry applications when used with an appropriate plastic wall plug.

Supplied in a box of 200 screws.

1" x 10 Woodscrews for Drinks Dispense Installations

The 5.0mm diameter and 25mm length make these screws useful for securing compatible brackets and equipment where a short but relatively substantial fixing is required.

Typical applications can include:

• Pipework brackets
• Beer line supports
• Gas pipe brackets
• Wall mounted cleaning sockets
• Secondary regulator brackets
• Cellar equipment
• Cable supports
• Small wall mounted accessories
• General installation equipment

Always select the correct screw, wall plug and fixing method for the substrate and load being supported.

Key Features

• No. 10 x 1" woodscrews
• Metric size: 5.0 x 25mm
• 60° twin-thread design
• Fully threaded
• PZ2 Pozi drive
• Double countersunk head
• Sharp 25° point
• C10-18 carbon steel construction
• Surface and core hardened
• Zinc-plated finish
• Suitable for compatible softwood
• Can be used with suitable plastic wall plugs for masonry
• Supplied in a box of 200

Twin-Thread Design

The screws feature 60° twin threads, designed for quick insertion and secure engagement with suitable materials.

The 25° sharp point helps the screw start cleanly and reduces the effort required to begin driving into compatible timber.

Fully Threaded

These 1" x 10 woodscrews are fully threaded, providing thread engagement along the available shank length.

This makes them particularly useful for securing compatible brackets, clips and fittings where a short fixing with good thread engagement is required.

Double Countersunk Head

The double countersunk head allows the screw to sit neatly into compatible brackets, fittings and timber.

A standard PZ2 Pozi recess provides secure engagement with a compatible screwdriver or power driver bit.

Zinc-Plated Carbon Steel

Manufactured from C10-18 carbon steel, the screws are surface and core hardened to provide strength while retaining suitable ductility.

The zinc-plated finish provides basic corrosion protection for use in clean, dry and low-humidity environments.

For damp cellars, outdoor installations or areas regularly exposed to moisture, a suitable stainless steel or more corrosion-resistant fixing may be required.

Suitable for Masonry with Wall Plugs

These 5.0mm diameter screws can also be used with appropriately sized plastic wall plugs when fixing into suitable masonry.

Always match the wall plug and screw to the substrate, fixing depth and weight of the equipment being installed.

Heavier equipment may require specialist fixings.

Suitable For

These 1" x 10 twin-threaded woodscrews are suitable for:

• Drinks dispense installations
• Pub and bar cellars
• Beer and gas pipe brackets
• Wall mounted cleaning equipment
• Regulator brackets
• Breweries
• Plumbing installations
• Electrical installation work
• General maintenance
• Timber installations
• Compatible masonry fixings with wall plugs

Specifications

• Product: Twin-Threaded Woodscrew
• Imperial Size: No. 10 x 1"
• Metric Size: 5.0 x 25mm
• Material: C10-18 Carbon Steel
• Finish: Zinc Plated
• Thread: 60° Twin Thread
• Threading: Fully Threaded
• Drive: Pozi PZ2
• Head: Double Countersunk
• Head Diameter: 9.54mm
• Inner Thread Diameter: 3.25mm
• Point: 25° Sharp Point
• Pack Quantity: 200