15mm Black Glycol Pipe – Beer Python & Cooling Pipe – 30m Roll

15mm Black Glycol Pipe – Beer Python & Cooling Pipe – 30m Roll

This 15mm Black Glycol Pipe is designed for beer cooling, chilled water and glycol circulation systems used within professional draught drinks installations.

Supplied as a 30 metre roll, the polyethylene pipe has a 15mm outside diameter and 10mm inside diameter, making it suitable for compatible 15mm push-fit fittings commonly used with remote beer coolers, python systems and chilled water circulation equipment.

It can be used for both flow and return pipework, carrying chilled water or a compatible water/glycol mixture between cooling equipment and the dispense system.

15mm Glycol Pipe for Beer Cooling Systems

This 15mm cooling pipe is particularly suited to draught beer installations where chilled water or glycol solution is circulated through a beer python or remote cooling system.

Typical applications include connections between:

• Remote beer coolers
• Glycol chillers
• Beer python systems
• Font and tap cooling systems
• Chilled water recirculation pumps
• Cooling manifolds
• Other compatible drinks dispense cooling equipment

Key Features

• 15mm black glycol pipe
• Suitable for beer cooling systems
• Suitable for chilled water circulation
• Suitable for compatible water/glycol mixtures
• 30 metre roll
• 15mm outside diameter
• 10mm inside diameter
• Polyethylene construction
• Suitable for flow and return pipework
• Compatible with suitable 15mm push-fit fittings
• Flexible for routing through cellar and bar installations
• Ideal for professional draught dispense cooling systems

Pipe Specifications

• Product: Glycol Pipe / Beer Cooling Pipe
• Colour: Black
• Material: Polyethylene
• Outside Diameter: 15mm
• Inside Diameter: 10mm
• Roll Length: 30 metres
• Application: Beer cooling, glycol and chilled water circulation

Beer Python Cooling Pipe

In a typical draught beer installation, chilled water or a water/glycol mixture can be circulated alongside the product lines within an insulated beer python.

The cooling circuit normally consists of a flow and return, allowing chilled fluid to circulate continuously between the cooler and the dispense point.

This can be used to support cooling around:

• Beer fonts
• Tap towers
• Long beer line runs
• Remote bars
• Dispense points away from the main cooler

The exact cooling arrangement will depend on the cooler, pump, python length and installation design.

Compatible with 15mm Push-Fit Fittings

The 15mm outside diameter is suitable for compatible 15mm push-fit fittings, including suitable John Guest and DMfit connectors.

Available fitting types can include:

• Straight connectors
• Equal elbows
• Stem elbows
• Equal tees
• Y-piece splitters
• Service valves
• Cooling manifolds

Pipe should be cut cleanly and square before being fully inserted into a push-fit connection.

Insulating Glycol & Cooling Pipework

For chilled applications, this pipe should normally be installed with suitable pipe insulation.

Insulating the flow and return pipework helps reduce unwanted heat gain and can help control condensation on cold pipe surfaces.

The black polyethylene pipe itself should not be treated as a replacement for suitable thermal insulation.

Suitable For

This 15mm black glycol pipe is suitable for compatible installations in:

• Pubs and bars
• Breweries and taprooms
• Restaurants
• Cellar installations
• Beer python systems
• Remote beer cooler installations
• Glycol cooling systems
• Mobile and event bars
• Professional draught drinks installations

30 Metre Roll

Supplied as one complete 30 metre roll, making it suitable for new installations, cellar refits, cooling system upgrades and professional drinks dispense engineers.

Important

The 15mm measurement refers to the outside diameter, with an approximate 10mm internal diameter.

Always check compatibility with the cooling fluid, operating temperature, system pressure and fittings before installation.